Audison Apbx10as2 Loaded Amplifier Enclosure Box 10 800w Subwoofer Bass Speaker

APBX 10AS2 - Audison 10 Amplified Enclosed Subwoofer Bass Speaker. The Prima APBX 10 AS2 active subwoofer, with 10-inch driver, features a dedicated high performance amplification module which enhances all the passive box technologies, such as the 2S² (2 Sides / 2 Sounds) design, the Plug & Play terminal block and ultra-compact size. The amplification module, with power outputs of 400W RMS is developed with he-li technology (high efficiency / low impedance) , which thanks to the absence of the DC-DC voltage booster reaches the impressive 90% efficiency level, very close to the theoretical limit of the D-Class. Nput stage DBT (Dynamic Bass Tracking) technology allows 100% use of the he-li (High Efficiency Low Impedance) amplifier power and to enjoy a tense and dynamic bass even at very high listening volumes.

Eliminating the voltage booster was made possible thanks to the development of the new dual coil drivers , which inherit all the technological background of the Prima subwoofers, but differ for the ultra low impedance (0.16 ohms for APBX 10 AS). This feature ensures a perfect synergy with the he-li (High Efficiency Low Impedance) technology, maximizing the combination of amplifier , speakers and sealed box , to obtain low, powerful and crisp frequencies.

The controls section is complete and provides an optimal regulation of the low frequency emission in the car cabin. The Butterworth low pass filter at 12dB/Oct. With variable cut-off frequency (50-200 Hz) can be bypassed, when used with an AP bit processor with pre-out output dedicated to the sub. The adjustable bass-boost control (0 ÷ 6 dB) at 45 Hz allows the user to emphasize the response in the lower side of the spectrum. The high-level speaker-in input on multi-pole connector eases the integration with OEM audio systems while the low-level input on RCA is dedicated to the connection with after market sources.

The subwoofer automatic turn on/off function ART (Automatic Remote Turn-On) can be configured to be controlled by the sources remote signal, by the voltage variation on the high-level input or by the audio signal on both inputs. Phase control (0 180 °) completes the equipment. The SSP (Sub Smart Plug) terminal block is provided with a single Plug&Play connector to be able to disconnect the box easily and safely.

Subwoofer Voice coil Ø mm in. 400 W Continuous Power 800 W Peak Power.

Sub box size mm in. 460 (18.11) x 158 (6.22) x 338 (13.31). Weight of one component kg (lb). High efficiency / Low impedance amplifier without switching power supply, for a performance next to ideal.

2S² (2 Sides / 2 Sounds) design. Provides the ability to select between Down-Firing positioning to increase the low frequency extension and Up-Firing install to obtain more punch and definition. SSP (Sub Smart Plug) terminal block. Provided with a Plug&Play connector to be able to disconnect the box easily and safely.

DBT monitors the input signal in real time by detecting in advance the peaks which, if not processed, will bring the amplifier / subwoofer system into uncontrolled distortion, when it is pushed to maximum power. You will be issued a Return Authorization Number. In order to maintain an inventory of 100%, Brand New, A-Stock, untouched products, all sales are final. We ask that you please be sure you are ordering the correct product. The item "AUDISON APBX10AS2 LOADED AMPLIFIER ENCLOSURE BOX 10 800W SUBWOOFER BASS SPEAKER" is in sale since Thursday, February 18, 2021. This item is in the category "Consumer Electronics\Vehicle Electronics & GPS\Car Audio\Car Amplifiers". The seller is "woofersetc_outlet" and is located in Los Angeles, California. This item can be shipped worldwide.

Model: APBX 10S2
RMS Power: 400 W
MPN: audison car audio sub woofer box
Channels: Single Voice Coil
Brand: Audison