JBL SUBBP12AM 12 Loaded Subwoofer Ported Enclosure + Free Sound Dampening Kit

Product SKU: 183657 ID: subbp12am_sdrf20. JBL SUBBP12AM + Free NVX Sound Dampening Kit. 450W Max Powered 12 Loaded Subwoofer Ported Enclosure System. 450W Max Powered 12 Loaded Subwoofer Ported Enclosure System Quantity: 1. Woofer surround type: Butyl Rubber.

Oversized, stacked magnets to increase magnetic flux. GT Series Mono block Car Amplifier counter sunk into back panel of enclosure. Max power output: 450 watts x 1 chan. Wired 16-1/2' remote bass level control included.

LED power (green) and protect (red) indicators. Variable Bass Boost (0 to +12 dB bass boost at 45 Hz).

Screw terminals for power, ground, and remote turn-on. Variable low-pass filter (40-200 Hz, 24 dB/octave). Subsonic filter (24 dB at 15 Hz). Eight gauge power and ground wiring is required for installation. 12 Single Ported Subwoofer Enclosure.

Dimensions: 12" D x 22-1/2" W x 14-5/8 H. Five Sheets of 18" x 32" 20 sq.

Tri-Layer Sound Damping Material (Sound Deadening) Adhesive Black Foam Rubber Quantity: 1. Tri-Layer Sound Damping Adhesive Black Foam Rubber. Tri Layer Design: Combines 100% Butyl Rubber, aluminum Foil, and Foam. Easy to install self adhesive sheets. Built to withstand temperatures of -40?

Perfect for applications on the roof, firewall, floor, quarter panels, doors, and more. Offers flexible and lightweight construction.

Reduce rattles and shakes in your car. Increase SPL as well as overall sound quality and output of your car audio system. Combine this kit with the NVX SDRLR1 Sound Dampening Rubber Roller. For a quick and easy installation.

Dimensions: 18" L x 32" W. How to Install Sound Damping Properly. Sound damping can be a very beneficial accessory to reduce noise and vibration. To take full advantage of this soundproofing, read these instructions carefully and follow them till the end. S important to familiarize yourself with all the details to install the sound damping correctly.

Incorrect installation will result in less than desirable results. The first step is to decide which location in your car you want to insulate. These locations include the floorboards, roof, door panels, trunk or firewall. We recommend soundproofing all metal surfaces for maximum sound deadening performance. Next, refer to your vehicleâ?? S service manual for information on how to dismantle the trimming panels. Be careful when removing the panels to avoid breaking the fixing clips. Once the trimming is dismantled, remove the remainder of the factory insulation if it is damaged. If it is still intact, there is no need to permanently remove it. Next, you need to properly clean, dry and degrease the prospective surface. Sound deadening won't adhere properly if applied to a wet or dirty surface.

Use a metal surface cleaner or degreaser along with a dry, clean rag. Make sure to use gloves and apply the degreaser in a well-ventilated space.

For this step, measure the prospective surface you are going to treat. To make things easier, make a template of the appropriate size on a large sheet of paper and then transfer it to the damping material.

That will make it easier to install it more accurately and avoid wasting material. Use a utility knife to cut the desired shape and size. Be careful and use gloves to protect your hands. Place a sheet of sound damping to the surface without removing the protective film. If it covers the surface properly, you are ready to install it.

Gradually remove the protective paper film as you apply it to the surface for better adhesion. Once on the surface, press it down firmly until it is set in place. Flatten it with your hands to avoid unnecessary air bubbles. Use a rolling tool like the NVX SDRLR1. To press the mat down to the metal surface.

Go across the entire surface with the roller to ensure that the sheet is installed properly. Once all sound deadening is in place, simply reinstall all trim pieces and carpet back to its original placement. Now you are ready to enjoy higher sound quality with fewer vibrations. THD at Rated RMS Power.

Yes - with included adapter. Get the most sound out of your new subwoofer with some high quality sound dampening material.

It will keep the road noise out and the music inside the car. Trunk Kit - 20 Square Feet of Sound Dampening Material (Five 18" x 32" Pieces). Dynamat Xtreme 20' Trunk Kit 19405. Trunk Kit with (5) Dynamat Extreme 18" x 32" Pieces. Boom Mat Damping Material (050210). Ft Damping Material - (10 pk - 12-1/2" x 24" x 2mm). Policies for US and Canadian Customers. Return for replacement within: 30 days. Defective Merchandise Merchandise that is discovered to be defective upon receipt will be replaced. Damaged Merchandise All packages are inspected for damage prior to leaving our warehouse. Damaged merchandise can be replaced with the same model only.

Replacement Terms We will send a product replacement for an authorized return following the completion of receiving and inspection at our facility. You will be required to complete our product return form which will also provide helpful instructions for your return. Battery, charger, cords, straps, etc. We will not process the return if any of these conditions are not followed. Any product without a valid, readable serial number, including but not limited to products with missing, damaged, altered, or otherwise unreadable serial number.

Any product from which the UPC code has been removed from its packaging. Any product that exhibits physical damage or abuse. Products that are not eligible for return for any of the above reason(s) will be sent back to you at your cost and expense. 10645 Freeport Drive, Louisville, KY 40258 USA.

Prices, specifications, and images are subject to change without notice. The item "JBL SUBBP12AM 12 Loaded Subwoofer Ported Enclosure + Free Sound Dampening Kit" is in sale since Saturday, May 1, 2021. This item is in the category "Consumer Electronics\Vehicle Electronics & GPS\Car Audio\Car Subwoofers". The seller is "www-sonicelectronix-com" and is located in Louisville, Kentucky. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica, Antigua and barbuda, Aruba, Belize, Dominica, Grenada, Saint kitts and nevis, Saint lucia, Montserrat, Turks and caicos islands, Barbados, Bangladesh, Bermuda, Brunei darussalam, Bolivia, Ecuador, Egypt, French guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman islands, Liechtenstein, Sri lanka, Luxembourg, Monaco, Macao, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Viet nam, Uruguay.

Model: SUBBP12AM, SDRF20
Modified Item: No
MPN: SUBBP12AM, SDRF20
Custom Bundle: Yes
Voice Coil: Single
Speaker Size: 12in.
Brand: JBL
Type: Enclosed Powered
Bundle Description: JBL SUBBP12AM 12" Loaded Subwoofer Ported Enclosure + Free Sound Dampening Kit
RMS Power: 150W