Kenwood P-XW1221SHP 12 Pre-loaded Subwoofer Enclosure Package

Kenwood P-XW1221SHP + Kenwood Excelon X502-1. 1000W Max (500W RMS) 12" Pre-loaded High-Power Subwoofer Enclosure + 1000W Max X-Series 2-Ohm Stable "X series Monoblock Amplifier. 1000W Max (500W RMS) 12 Pre-loaded High-Power Subwoofer Enclosure Quantity: 1. 1000W 12 Pre-loaded Subwoofer Enclosure.

Polypropylene Cone with Dual Area Cap Woofers. 5/8" MDF construction with 3/4" MDF baffle. Down-firing design for greater output and more installation flexibility. Push terminals accommodate up to 8-gauge wire.

Enclosure Dimensions: 11-3/8" D x 20-7/8" W x 15-13/16 H. 1000W Peak (500W RMS) eXcelon Series Class-D Monoblock Amplifier Quantity: 1. EXcelon Series Class D 2 ohms Stable Monoblock Amplifier.

4 ohms: 300 watts x 1 channel. 2 ohms: 500 watts x 1 channel. Total RMS power output: 500 watts. Mono output of pre-amp outputs.

Input sensitivity: 200mV - 5 volts. Frequency Response: 20 - 200 Hz. Total Harmonic Distortion (THD): 1%. Signal to Noise Ratio: 85 dB.

Variable low-pass filter: 50 - 200 Hz. Variable Bass Boost: 0 - 18 dB. 8 AWG gauge amplifier wiring kit is recommended for installation. Dimensions: 8-7/16" L x 5-15/16" W x 2-1/8 H. Black Handle Stainless Steel Utility Knife.

NVX Black Handle Stainless Steel Utility Knife. Get the most sound out of your new subwoofer with some high quality sound dampening material. It will keep the road noise out and the music inside the car. Trunk Kit - 20 Square Feet of Sound Dampening Material (Five 18" x 32" Pieces).

Trunk Kit with (5) Dynamat Extreme 18" x 32" Pieces. Boom Mat Damping Material (050210). Ft Damping Material - (10 pk - 12-1/2" x 24" x 2mm).

Policies for US and Canadian Customers. Return for replacement within: 30 days. Defective Merchandise Merchandise that is discovered to be defective upon receipt will be replaced. Damaged Merchandise All packages are inspected for damage prior to leaving our warehouse. Damaged merchandise can be replaced with the same model only. Replacement Terms We will send a product replacement for an authorized return following the completion of receiving and inspection at our facility.

You will be required to complete our product return form which will also provide helpful instructions for your return. Battery, charger, cords, straps, etc. We will not process the return if any of these conditions are not followed. Any product without a valid, readable serial number, including but not limited to products with missing, damaged, altered, or otherwise unreadable serial number. Any product from which the UPC code has been removed from its packaging.

Any product that exhibits physical damage or abuse. Products that are not eligible for return for any of the above reason(s) will be sent back to you at your cost and expense.

Prices, specifications, and images are subject to change without notice.

---