Kenwood P-XW1241S 600W 12 Pre-loaded Subwoofer Enclosure with Monoblock Amplifier
Product SKU: 197620 ID: pxw1241s_x5021. Kenwood P-XW1241S + Kenwood Excelon X502-1. 600W Max (300W RMS) Single 12" Pre-loaded Subwoofer Enclosure + 1000W Max X-Series 2-Ohm Stable "X series Monoblock Amplifier.
600W Max (300W RMS) Single 12 Pre-loaded Subwoofer Enclosure Quantity: 1. 600W Single 12 Pre-loaded Subwoofer Enclosure. Polypropylene Cone with Diamond Array Pattern Woofer.
Enclosure Dimensions: 11-3/8" D x 20-7/8" W x 15-13/16 H. 1000W Max X-Series 2-Ohm Stable "X series" Monoblock Amplifier Quantity: 1. Class-D 2-Ohm Stable Monoblock Amplifier. 4 ohms: 300 watts x 1 chan. 2 ohms: 500 watts x 1 chan.
Total power output: 1000 watts. Pulse Width Modulated MOSFET power supply. 3-way protection circuitry (thermal, overload, and speaker short protection). Frequency Response: 20 - 200 Hz.
Total Harmonic Distortion (THD): 1%. Signal to Noise Ration: 85dB. Variable low-pass filter: 50 - 200Hz, 12 dB/octave.Variable Bass Boost: 0 to +18 dB bass boost at 40Hz. 4 gauge power and ground wiring is recommended for installation. Dimensions: 8-3/8" W x 5-7/8" L x 2-1/16 H.
Get the most sound out of your new subwoofer with some high quality sound dampening material. It will keep the road noise out and the music inside the car. Trunk Kit - 20 Square Feet of Sound Dampening Material (Five 18" x 32" Pieces).
Trunk Kit with (5) Dynamat Extreme 18" x 32" Pieces. Boom Mat Damping Material (050210). Ft Damping Material - (10 pk - 12-1/2" x 24" x 2mm).
Policies for US and Canadian Customers. Return for replacement within: 30 days.
Defective Merchandise Merchandise that is discovered to be defective upon receipt will be replaced. Damaged Merchandise All packages are inspected for damage prior to leaving our warehouse. Damaged merchandise can be replaced with the same model only. Replacement Terms We will send a product replacement for an authorized return following the completion of receiving and inspection at our facility. You will be required to complete our product return form which will also provide helpful instructions for your return. Battery, charger, cords, straps, etc. We will not process the return if any of these conditions are not followed.Any product without a valid, readable serial number, including but not limited to products with missing, damaged, altered, or otherwise unreadable serial number. Any product from which the UPC code has been removed from its packaging. Any product that exhibits physical damage or abuse. Products that are not eligible for return for any of the above reason(s) will be sent back to you at your cost and expense.
10645 Freeport Drive, Louisville, KY 40258 USA. Prices, specifications, and images are subject to change without notice.