MTX TNE212D 1500W Dual 12 Car Audio Subwoofers Complete Bass Package
Product SKU: 145117 ID: tne212d_pl15001m_bb1d. MTX TNE212D Dual 12 Car Subwoofers + 1500W Amplifier + 1 Farad Cap + Wiring Kit. 1500W Complete Bass Package with Bass Knob!
MTX Audio TNE212D Terminator Dual Subwoofer Package. 800W Max (400W RMS) Dual 12 Terminator Series Loaded Subwoofer Bass Enclosure Quantity: 1. 400 watts Dual 12 Sealed Subwoofer Enclosure. Peak: 800 watts Total (400 watts Each Sub).
RMS: 400 watts Total (200 watts Each Sub). Preloaded with two 12 Subwoofers. Frequency Response: 10 - 150 Hz.Enclosure Dimensions: 11-1/8" TD x 13-1/2" BD x 29-11/16" W x 14" H. 1500W Max Pulse Series Class A/B Monoblock Car Amplifier Quantity: 1. Class-A/B 2-Ohm Stable Monoblock Amplifier. 4 ohms: 563 watts x 1 chan. 2 ohms: 750 watts x 1 chan.
Total power output: 1500 watts. Pulse Width Modulated MOSFET power supply. Wired remote bass level control included.LED power (green) and protect (red) indicators. 3-way protection circuitry (thermal, overload, and speaker short protection). Signal to Noise Ratio: 105 dB.
Frequency Response: 9Hz - 50kHz. Variable low-pass filter: 35 Hz to 160 Hz. Variable Bass Boost: 0 to +18 dB bass boost. 4 gauge power and ground wiring is recommended for installation. Dimensions: 7" W x 10" L x 2.26 H.
Planet Audio PL1500.1M ownerâs manual. Belva 1.0 Farad Capacitor.
1.0 Farad Capacitor with Digital Red Display Quantity: 1. 1.0 Farad Power Capacitor. Perfect for systems up to 1000W. Accepts any gauge of wire with ring terminals. Dimensions: 10-1/2" L x 4-1/2" W x 3-1/2 H.8 Gauge Premium (CCA) Copper Clad Aluminum Complete 2-Channel Amplifier Wiring Kit with RCA for Amplifiers up to 600 Watts - RED Quantity: 1. Complete 8 Gauge 2-Channel Amplifier Installation Kit. Designed for car audio systems up to 600 watts RMS. Premium Powerflex power and ground wire provides optimal power transfer. Belva CCA wire is made from 30% copper while the competition uses only 10%.
Helical Twist Construction Audio Interconnect RCA cables minimize noise and interference. MINI-ANL Fuse holder with a 60 amp fuse offers ideal protection for high powered systems. Complies to American Wire Gauge standards. (5.2 meters) Red 8 gauge power wire. 91 meters Black 8 gauge ground wire. (5.2 meters) Gray 18 gauge remote lead wire. (5.2 meters) Helical Twist 2-channel RCA interconnect cable. (6.1 meters) 16 Gauge Speaker cable.One MINI-ANL Fuse Holder with a 60 amp fuse. One Black rubber firewall grommet. One 8 Gauge Red chrome plated ring terminals. One 8 Gauge Black chrome plated ring terminal.
Three 18 Gauge Red Spade terminal. Two 18 Gauge Black Spade terminal. One 18 Gauge Red butt connector. Ten 4 Black zip ties. Black Handle Stainless Steel Utility Knife.
NVX Black Handle Stainless Steel Utility Knife. Get the most sound out of your new subwoofer with some high quality sound dampening material. It will keep the road noise out and the music inside the car.Trunk Kit - 20 Square Feet of Sound Dampening Material (Five 18" x 32" Pieces). Dynamat Xtreme 20' Trunk Kit 19405.
Trunk Kit with (5) Dynamat Extreme 18" x 32" Pieces. Boom Mat Damping Material (050210). Ft Damping Material - (10 pk - 12-1/2" x 24" x 2mm).
Policies for US and Canadian Customers. Return for replacement within: 30 days.
Defective Merchandise Merchandise that is discovered to be defective upon receipt will be replaced. Damaged Merchandise All packages are inspected for damage prior to leaving our warehouse. Damaged merchandise can be replaced with the same model only. Replacement Terms We will send a product replacement for an authorized return following the completion of receiving and inspection at our facility. You will be required to complete our product return form which will also provide helpful instructions for your return.
Battery, charger, cords, straps, etc. We will not process the return if any of these conditions are not followed. Any product without a valid, readable serial number, including but not limited to products with missing, damaged, altered, or otherwise unreadable serial number. Any product from which the UPC code has been removed from its packaging.
Any product that exhibits physical damage or abuse. Products that are not eligible for return for any of the above reason(s) will be sent back to you at your cost and expense. BAK82, BB1D, PL1500.1M, TNE212D. Prices, specifications, and images are subject to change without notice.