Loaded Car Subwoofers

MTX TNE212D 400W Dual 12 Loaded Car Subwoofer with 1500W Mono Amp + 8 AWG Amp Kit

MTX TNE212D 400W Dual 12 Loaded Car Subwoofer with 1500W Mono Amp + 8 AWG Amp Kit
MTX TNE212D 400W Dual 12 Loaded Car Subwoofer with 1500W Mono Amp + 8 AWG Amp Kit
MTX TNE212D 400W Dual 12 Loaded Car Subwoofer with 1500W Mono Amp + 8 AWG Amp Kit
MTX TNE212D 400W Dual 12 Loaded Car Subwoofer with 1500W Mono Amp + 8 AWG Amp Kit
MTX TNE212D 400W Dual 12 Loaded Car Subwoofer with 1500W Mono Amp + 8 AWG Amp Kit
MTX TNE212D 400W Dual 12 Loaded Car Subwoofer with 1500W Mono Amp + 8 AWG Amp Kit
MTX TNE212D 400W Dual 12 Loaded Car Subwoofer with 1500W Mono Amp + 8 AWG Amp Kit
MTX TNE212D 400W Dual 12 Loaded Car Subwoofer with 1500W Mono Amp + 8 AWG Amp Kit
MTX TNE212D 400W Dual 12 Loaded Car Subwoofer with 1500W Mono Amp + 8 AWG Amp Kit
MTX TNE212D 400W Dual 12 Loaded Car Subwoofer with 1500W Mono Amp + 8 AWG Amp Kit
MTX TNE212D 400W Dual 12 Loaded Car Subwoofer with 1500W Mono Amp + 8 AWG Amp Kit

MTX TNE212D 400W Dual 12 Loaded Car Subwoofer with 1500W Mono Amp + 8 AWG Amp Kit
Product SKU: 145115 ID: tne212d_pl15001m. MTX TNE212D Dual 12 Car Subwoofers + Planet Audio 1500W Amp + Wiring Kit. 1500W Complete Bass Package with Bass Knob!

MTX Audio TNE212D Terminator Dual Subwoofer Package. 1200 Watt Dual 12 Terminator Series Loaded Subwoofer Bass Enclosure Quantity: 1. TNE212D Dual Loaded Subwoofer Enclosure Features. Also Available with an Amplifier & Bass Knob: MTX Audio TNP212D2. 2 12 Terminator Series Subwoofers Included.

Internally wired to a 2-ohm final load. MTX Audio Logo on Dustcap. Dual 12 Sealed Sub Enclosure. Terminator Logo Embroidered into Carpet Front. Dimensions: 14" H x 29-11/16" W x 13-1/2" D1 x 11-1/8" D2. 1500W Max Pulse Series Class A/B Monoblock Car Amplifier Quantity: 1. Class-A/B 2-Ohm Stable Monoblock Amplifier. 4 ohms: 563 watts x 1 chan. 2 ohms: 750 watts x 1 chan.

Total power output: 1500 watts. Pulse Width Modulated MOSFET power supply. Wired remote bass level control included. LED power (green) and protect (red) indicators.

3-way protection circuitry (thermal, overload, and speaker short protection). Signal to Noise Ratio: 105 dB. Frequency Response: 9Hz - 50kHz.

Variable low-pass filter: 35 Hz to 160 Hz. Variable Bass Boost: 0 to +18 dB bass boost. 4 gauge power and ground wiring is recommended for installation. Dimensions: 7" W x 10" L x 2.26 H. Check out the Pulse Series. Complete 8 Gauge Amplifier Wiring Kit with 2-Channel RCA Interconnects (CCA Wiring) Quantity: 1.

Complete 8 Gauge 2-Channel Amplifier Installation Kit. Designed specifically for car audio systems up to 500 watts RMS. Premium Powerflex power and ground wire provides optimal power transfer. Made from Copper-Clad Aluminum for a pure uninterrupted transfer of power and signal. Belva CCA wire is made from 30% copper while other CCA wire is just 10% copper.

Helical Twist Construction Audio Interconnect RCA cables minimize noise and interference. Mini-ANL Fuse holder with a 60 amp Mini-ANL fuse offers ideal protection. (5.2 meters) Red 8 gauge power wire. 91 meters Black 8 gauge ground wire. (5.2 meters) Gray 18 gauge remote lead wire.

(5.2 meters) Helical Twist 2-channel RCA interconnect cable. (6.1 meters) Speaker cable. One In-line Mini-ANL Fuse Holder with a 60 amp Mini-ANL fuse. One black rubber firewall grommet. One 8 Gauge red chrome plated ring terminals. One 8 Gauge black chrome plated ring terminal. Three 18 Gauge red Spade terminal. Two 18 Gauge black Spade terminal.

One 18 Gauge red butt connector. Ten 4 Black zip ties. This kit is CCA (Copper Clad Aluminum). Watch this video to learn why you should choose an OFC Amp Kit! Supreme and comfortable KN95 PFF2 Mask Respirators.

(Cannot combine with other products). Get the most sound out of your new subwoofer with some high quality sound dampening material.

It will keep the road noise out and the music inside the car. Trunk Kit - 20 Square Feet of Sound Dampening Material (Five 18" x 32" Pieces). Trunk Kit with (5) Dynamat Extreme 18" x 32" Pieces.

Boom Mat Damping Material (050210). Ft Damping Material - (10 pk - 12-1/2" x 24" x 2mm). Policies for US and Canadian Customers.

Return for replacement within: 30 days. Defective Merchandise Merchandise that is discovered to be defective upon receipt will be replaced. Damaged Merchandise All packages are inspected for damage prior to leaving our warehouse. Damaged merchandise can be replaced with the same model only. Replacement Terms We will send a product replacement for an authorized return following the completion of receiving and inspection at our facility.

You will be required to complete our product return form which will also provide helpful instructions for your return. Battery, charger, cords, straps, etc. We will not process the return if any of these conditions are not followed. Any product without a valid, readable serial number, including but not limited to products with missing, damaged, altered, or otherwise unreadable serial number. Any product from which the UPC code has been removed from its packaging. Any product that exhibits physical damage or abuse. Products that are not eligible for return for any of the above reason(s) will be sent back to you at your cost and expense. 10645 Freeport Drive, Louisville, KY 40258 USA.

Prices, specifications, and images are subject to change without notice. This item is in the category "Consumer Electronics\Vehicle Electronics & GPS\Car Audio\Car Subwoofers". The seller is "www-sonicelectronix-com" and is located in this country: US. This item can be shipped to United States.

  • Brand: MTX
  • Type: Enclosed Non-Powered
  • Speaker Size: 12in.
  • Custom Bundle: Yes
  • Model: BAK82,PL1500.1M,TNE212D
  • MPN: BAK82,PL1500.1M,TNE212D
  • RMS Power: 400W
  • Modified Item: No
  • UPC: 818060014062


MTX TNE212D 400W Dual 12 Loaded Car Subwoofer with 1500W Mono Amp + 8 AWG Amp Kit