Open box JBL BassPro12 12 Loaded/Powered Subwoofer System
Product SKU: 194545 ID: subbp12am_obc8. JBL BassPro 12 (Open-box, Like New). 450W Max Powered 12 Loaded Subwoofer Ported Enclosure System. Woofer surround type: Butyl Rubber.
Oversized, stacked magnets to increase magnetic flux. Frequency response: 35Hz รข 120Hz. GT Series Mono block Car Amplifier counter sunk into back panel of enclosure.
Max power output: 450 watts x 1 chan. Wired 16-1/2' remote bass level control included. LED power (green) and protect (red) indicators.Variable Bass Boost (0 to +12 dB bass boost at 45 Hz). Screw terminals for power, ground, and remote turn-on. Variable low-pass filter (40-200 Hz, 24 dB/octave).
Subsonic filter (24 dB at 15 Hz). Eight gauge power and ground wiring is required for installation. 12 Single Ported Subwoofer Enclosure. Dimensions: 12" D x 22-1/2" W x 14-5/8 H.THD at Rated RMS Power. Yes - with included adapter.
Your new amplifier is going to need to receive the right power and ground connections to be powered correctly. These amplifier installation kits are the ideal solution for your amplifier. Complete 8 Gauge Amplifier Wiring Kit with 2-Channel RCA Cable (CCA Wiring). Black Handle Stainless Steel Utility Knife. NVX Black Handle Stainless Steel Utility Knife. Get the most sound out of your new subwoofer with some high quality sound dampening material. It will keep the road noise out and the music inside the car.Trunk Kit - 20 Square Feet of Sound Dampening Material (Five 18" x 32" Pieces). Trunk Kit with (5) Dynamat Extreme 18" x 32" Pieces. Boom Mat Damping Material (050210).
Ft Damping Material - (10 pk - 12-1/2" x 24" x 2mm). Policies for US and Canadian Customers. Return for replacement within: 30 days. Defective Merchandise Merchandise that is discovered to be defective upon receipt will be replaced.
Damaged Merchandise All packages are inspected for damage prior to leaving our warehouse. Damaged merchandise can be replaced with the same model only. Replacement Terms We will send a product replacement for an authorized return following the completion of receiving and inspection at our facility. You will be required to complete our product return form which will also provide helpful instructions for your return.
Battery, charger, cords, straps, etc. We will not process the return if any of these conditions are not followed. Any product without a valid, readable serial number, including but not limited to products with missing, damaged, altered, or otherwise unreadable serial number. Any product from which the UPC code has been removed from its packaging. Any product that exhibits physical damage or abuse. Products that are not eligible for return for any of the above reason(s) will be sent back to you at your cost and expense. Prices, specifications, and images are subject to change without notice.