Loaded Car Subwoofers

Pioneer TS-A3000LB 12 Shallow-Mount Loaded Sealed Enclosure Subwoofer Package

Pioneer TS-A3000LB 12 Shallow-Mount Loaded Sealed Enclosure Subwoofer Package
Pioneer TS-A3000LB 12 Shallow-Mount Loaded Sealed Enclosure Subwoofer Package
Pioneer TS-A3000LB 12 Shallow-Mount Loaded Sealed Enclosure Subwoofer Package
Pioneer TS-A3000LB 12 Shallow-Mount Loaded Sealed Enclosure Subwoofer Package
Pioneer TS-A3000LB 12 Shallow-Mount Loaded Sealed Enclosure Subwoofer Package
Pioneer TS-A3000LB 12 Shallow-Mount Loaded Sealed Enclosure Subwoofer Package
Pioneer TS-A3000LB 12 Shallow-Mount Loaded Sealed Enclosure Subwoofer Package
Pioneer TS-A3000LB 12 Shallow-Mount Loaded Sealed Enclosure Subwoofer Package
Pioneer TS-A3000LB 12 Shallow-Mount Loaded Sealed Enclosure Subwoofer Package
Pioneer TS-A3000LB 12 Shallow-Mount Loaded Sealed Enclosure Subwoofer Package
Pioneer TS-A3000LB 12 Shallow-Mount Loaded Sealed Enclosure Subwoofer Package

Pioneer TS-A3000LB 12 Shallow-Mount Loaded Sealed Enclosure Subwoofer Package
Product SKU: 194635 ID: tsa3000lb_mrvm500_bak42. Pioneer TS-A3000LB + Alpine MRVM500 + Belva 4 Gauge Amp Wiring Kit. 400W RMS 12 Shallow-Mount Truck Style Enclosure + Alpine 500W Monoblock Amp + Amp Kit. 400W RMS A-Series 12 Shallow-Mount Loaded Sealed Truck Style Enclosure (Perfect for Behind and Underneath the Seat) Quantity: 1. 12 Shallow-Mount Compact Pre-Loaded Sealed Enclosure. Impedance: 2 Ohm Single Voice Coil. Frequency Response: 20Hz - 1 kHz. Fully Covered Steel Mesh Grille.

Carpeted Enclosure with Embroidered Logo. Dimensions: 23-5/8" W x 13-3/4" D x 6-3/4 H. 1100W Peak (500W RMS) V-Power Series Class D Monoblock Amplifier Quantity: 1.

V Power Series Class D 2 ohms Stable Monoblock Amplifier. 4 ohms: 300 watts x 1 channel. 2 ohms: 500 watts x 1 channel. Total RMS power output: 500 watts.

Wired bass level remote control with optional Alpine RUX-KNOB. 1 pair of pre-amp outputs. 4-way protection circuitry (Over-Current, Over-Voltage, Under-Voltage, and Thermal Protection). Frequency Response: 7 - 400 Hz. Signal to Noise Ratio: 85 dB. Variable low-pass filter: 50 - 400 Hz. Variable Bass Boost: 0 - 12 dB. 4 AWG gauge amplifier wiring kit is recommended for installation. Dimensions: 7-7/8" L x 7-7/8" W x 2-3/16 H. Check out the Alpine MRV-M500. 4 Gauge Premium (CCA) Copper Clad Aluminum Complete 2-Channel Amplifier Wiring Kit with RCA for Amplifiers up to 1200 Watts - RED Quantity: 1.

Complete 4 Gauge 2-Channel Amplifier Installation Kit. Designed for car audio systems up to 1200 watts RMS. Premium Powerflex power and ground wire provides optimal power transfer.

Belva CCA wire is made from 30% copper while the competition uses only 10%. Helical Twist Construction Audio Interconnect RCA cables minimize noise and interference. MINI-ANL Fuse holder with a 80 amp fuse offers ideal protection for high powered systems. Complies to American Wire Gauge standards. (5.2 meters) Red 4 gauge power wire. 91 meters Black 4 gauge ground wire. (5.2 meters) Gray 18 gauge remote lead wire. (5.2 meters) Helical Twist 2-channel RCA interconnect cable. (6.1 meters) 16 Gauge Speaker cable. One MINI-ANL Fuse Holder with a 80 amp fuse. One Black rubber firewall grommet. One 4 Gauge Red chrome plated ring terminals.

One 4 Gauge Black chrome plated ring terminal. Three 18 Gauge Red Spade terminal. Two 18 Gauge Black Spade terminal. One 18 Gauge Red butt connector.

Ten 4 Black zip ties. Black Handle Stainless Steel Utility Knife. NVX Black Handle Stainless Steel Utility Knife.

Get the most sound out of your new subwoofer with some high quality sound dampening material. It will keep the road noise out and the music inside the car. Trunk Kit - 20 Square Feet of Sound Dampening Material (Five 18" x 32" Pieces). Dynamat Xtreme 20' Trunk Kit 19405. Trunk Kit with (5) Dynamat Extreme 18" x 32" Pieces.

Boom Mat Damping Material (050210). Ft Damping Material - (10 pk - 12-1/2" x 24" x 2mm). Policies for US and Canadian Customers. Return for replacement within: 30 days. Defective Merchandise Merchandise that is discovered to be defective upon receipt will be replaced. Damaged Merchandise All packages are inspected for damage prior to leaving our warehouse. Damaged merchandise can be replaced with the same model only. Replacement Terms We will send a product replacement for an authorized return following the completion of receiving and inspection at our facility. You will be required to complete our product return form which will also provide helpful instructions for your return. Battery, charger, cords, straps, etc. We will not process the return if any of these conditions are not followed. Any product without a valid, readable serial number, including but not limited to products with missing, damaged, altered, or otherwise unreadable serial number. Any product from which the UPC code has been removed from its packaging.

Any product that exhibits physical damage or abuse. Products that are not eligible for return for any of the above reason(s) will be sent back to you at your cost and expense. Prices, specifications, and images are subject to change without notice.


Pioneer TS-A3000LB 12 Shallow-Mount Loaded Sealed Enclosure Subwoofer Package